TROUBLESHOOTING
1) THE MSM-1 IS INSTALLED, BUT YOU CAN'T SWITCH THE ATTAX VIA MIDI.
The external device is set to the wrong MIDI channel -> Set the MIDI channel as described in Sec. 2.1
or activate the omni mode.
No presets are stored -> Store presets as described in Section 2.1
No PROGRAM CHANGE MESSAGES are aent to the ATTAX -> Check to see if the external device is
actually sending PROGRAM CHANGE MESSAGES.
The MIDI cable is defective -> Replace the cable and connect the devices as described in section 1.3
2) THE CLEAN AND/OR CRUNCH CHANNELS WILL NOT ACTIVATE PROPERLY VIA MIDI
file://C:\Dokumente und Einstellungen\RForse\Desktop\msm1manual.htm
Comments to this Manuals